Update; Offline Update; Backup And Restore - DiGidot C4 Manual

Developer mode
> Console

Update

Home > Settings > Update
When there is an internet connection, the user interface will automatically show if a firmware update
is available. Please note that it is possible to update multiple devices at a time. Before updating
please make sure that all connected devices have the same firmware version, that all devices are all
switched on and connected by wired Ethernet. Follow the update instructions from the interface.
Offline update
When no internet connection is available, you can download the latest update from our website and
then manually upload it to the DiGidot C4.
Open your web browser and go to the following address:
fwupdate.htm. Click the "Browse" button and locate the update file. Then Click "update" to start the
update process (this may take a few minutes).
After the update is completed the DiGidot C4 status lights will return to idle state, fading blue to
light blue.
By default the IP Address of the DiGidot C4 is 10.254.254.254. When you have configured an IP
Address you can use that IP Address as well.

Backup and restore

Home > Settings > Backup and restore
The DiGidot C4 has a backup feature that allows to back-up the device settings from multiple
devices. The backup will save all of accounts settings, network settings, device settings and triggers.
Please note that information on the microSD card such as scenes, playlists and app settings are not
backed up. Those files can be backup by removing the microSD card from the DiGidot C4 and copying
it manually to a computer (fastest method), or you can go to Home > Settings > File browser and
click on the download button to download files on to a computer.
C4 Manual
This mode adds the 'Console' menu item to the Home page.
Opens a command editor which should only be used by advanced users or if
instructed by DiGidot support.
http://<ip-address of the DiGidot C4>/
Version 2.1.5 61 74 -