DiGidot C4 Manual page 58

Connect to Wi-Fi
The DiGidot C4 will connect to another Wi-Fi network. If the Wi-Fi network is secured, you need to
enter the network password.
Select a network
This shows a list of available Wi-Fi networks found by the DiGidot C4.
After selecting a network, you will be asked to enter the network password in case it is protected.
Static IP
Enable the option to fill in a static IP Address. When disabled the DiGidot C4 will use DHCP to get an
IP Address from the network.
IP Address
The (static) Wi-Fi IP Address of the DiGidot C4. Make sure it's in the same IP Address range as the
network you are connecting with.
Subnet-mask
Network broadcast range of your device.
Connect to Wi-Fi settings example
Select a network:
Password:
Static IP:
NOTE: Avoid Interference with Wi-Fi
The following items can cause interference with the Wi-Fi signal:
Microwave ovens
‣
Direct Satellite Service (DSS) radio frequency leakage
‣
Electrical installations such as power-lines, electrical railroad tracks and power-stations
‣
Wireless devices that operate in the 2.4 GHz range.
‣
Do not install this device in metal or aluminium cabinets when you want to use direct Wi-Fi
communication. If you have problems with your DiGidot C4 communication, change the channel that
your device is using for Wi-Fi or switch to Auto-Channel.
In the right top menu you find additional tools under the three dots in the top right blue bar.
Restart all
This will restart all devices in the network.
Global settings (multiple devices only)
This page offers global settings that will be apply to all selected devices.
Such as;
Subnet mask
‣
Gateway
‣
Smart DHCP server
‣
C4 Manual
HomeNetwork
HomeNetworkPassword
Disabled
Version 2.1.5 58 74 -