Mow/Transport Switch
Adjusting
Reelmaster
®
3100-D/3105-D
20252SL Rev A
g346739
1.
Mow/Transport switch
The switch used for the mow/transport slide is a normally closed switch. The
switch opens when the mow/ transport slide is in the transport position. The
switch is located under the floor plate
1. Park the machine on a level surface, engage the parking brake, lower the
cutting units and stop the engine. Remove the key from the key switch.
g346740
1.
Mow/Transport switch
2. When the mow/transport lever is on the transport position, the clearance
between the rocker arm and the switch should be 0.6 to 1.1 mm (0.025 to
0.045 in) at the closest point
Figure 111
(Figure
111).
Figure 112
2.
Rocker arm
(Figure
112).
Page 6–7
Electrical System: Adjustments