Toro Reelmaster 3100-D Service Manual page 196

Removing the Control Valve (continued)
Installing the Control Valve
Hydraulic System: Service and Repairs
g345754
1. Lift control valve
2. Support bracket
2. Remove control valve from the frame using
guides.
3. If hydraulic fittings are to be removed from control valve, mark fitting
orientation to allow correct assembly.
1. If fittings were removed, install fittings to control valve using marks made
during the removal process to properly orientate fittings.
2. Install control valve to the frame using
3. Make sure hydraulic tank is full. Add correct fluid if necessary (see
Operator 's Manual).
Figure 93
3. Flange head screws
4. Frame
Figure 92
Page 5–120
Figure 92 and Figure 93
and Figure 93 as guides.
Reelmaster ® 3100-D/3105-D
20252SL Rev A
as