Servicing The Hydraulic Manifold - Toro Reelmaster 3100-D Service Manual

Servicing the Hydraulic Manifold

g345657
1. Manifold body
2. Plug (Zero Leak #8)
3. Rotary cartridge valve (flow control) 11.
4. Rotary handle assembly
5. Solenoid relief cartridge valve
6. Nut
7. Solenoid coil
8. Logic control cartridge
Reelmaster ® 3100-D/3105-D
20252SL Rev A
9. Plug (Zero Leak #4) (10 each)
10. Spring pin (2 each)
Plug (SAE #4)
12. Mow/backlap spool
13. Ball
14. Dowel pin
15. O-ring
16. Ball switch (N.C.)
Note: The ports on the hydraulic manifold are marked for easy identification of
components. Example: FC is the flow control valve and P1 is the gear pump
connection port (See Hydraulic Schematic (page 5–11)
the hydraulic lines and cartridge valves at each port location).
Figure 89
17.
18.
19.
20.
21.
22.
Page 5–113
Plug (Zero Leak #2) (2 each)
Orifice (.020)
Plug (Zero Leak #6)
Check valve
Plug (SAE #6) (2 each)
Orifice (.073)
to identify the function of
Hydraulic System: Service and Repairs