Connect Spectano 100 To A Test Object - Omicron Lab SPECTANO 100 User Manual

9.4

Connect SPECTANO 100 to a test object

You can connect SPECTANO 100 to a test cell for liquid or solid materials. This section describes how to
connect SPECTANO 100 to the most common test cell types.
DANGER
Avoid serious injury or death caused by
carrying out the testing procedure incorrectly.
•
•
•
•
•
•
•
•
► Always observe the five safety rules (see chapter 2 "Safety instructions").
► Before performing a test with SPECTANO 100, all on-site procedures and
methods for personal safety and all safety instructions in this User Manual
must be discussed with all personnel involved so that they are familiar with
and fully understand all safety rules and instructions.
► Before each test, the responsibility of all personnel involved must clearly
be established, and the testing workflow must be determined.
► Make sure to exactly comply with the workflow described in this User
Manual.
► Never perform tests without having secured the danger zone with clearly
visible barriers and having placed all parts with hazardous voltage within
the barriers.
carrying out the connection incorrectly.
not clearly established responsibilities of the personnel involved.
either not or incorrectly applied safety rules and instructions.
dangerous voltages at touchable parts of the device, test cell or
sample.
dangerous voltages at the OUTPUT connector of the device.
using another power supply than the delivered one (DRA SUPPLY).
electric shock from hazardous parts of the device, test cell or sample.
Installation
27