10.3
Perform measurements
After you have created a new test, you can add measurements to the test. By default, every test includes
at least one measurement. You can add additional measurements and clone (copy a measurement with
settings but without results) selected measurements.
To add a measurement to the test:
1. Click the Add measurement button
context menu. A new measurement is added to the list under Material measurement(s).
2. Click the new measurement in the list, and then configure the measurement as described in 10.2
"Create a new test".
3. To clone a measurement, select the specific measurement in the Navigation list and click the
Clone measurement button
measurement. A new measurement with the settings of the selected measurement, but without
results, is added to the list under Material measurement(s).
on the ribbon or on the Material Measurement(s)
on the ribbon or in the context menu of the selected
SPECTANO Analyzer Suite
39