Table of Contents
Advertisement
Depending on the connection type of the test cell, OMICRON Lab offers the following adapters:
•
High-temperature low-noise triaxial-to-BNC adapter with inner and outer shield connected to
the BNC outer shield
Inner conductor
Figure 9-2
•
Triaxial-to-4 mm plug adapter
The three contacts (inner conductor, inner shield and outer shield) of the triaxial connection are
led through separately. They end in a 4 mm plug. Additionally, each cable has a shield which is
connected to the inner shield (guard) of the triaxial connection.
Cable (triaxial)
Figure 9-3
BNC (coaxial)
Cable (triaxial)
Outer shield
Inner shield
(ground)
(guard)
High-temperature low-noise triaxial-to-BNC adapter
4 mm plugs
Outer shield (ground
Inner conductor
Inner shield (guard
Triaxial-to-4 mm plug adapter
Inner conductor
Outer shield (ground)
Installation
29
Advertisement
Table of Contents
