Table of Contents
Advertisement
10.7
Settings
The following table describes the general test settings.
Table 10-9
General test settings
Data
General test information
Tester name
General test settings
Waiting time between
measurements
Measurement status information
Measurement name
Measurement started
SPECTANO Analyzer Suite supports testing with the following test cell configurations:
•
Test cell with disk electrodes
OMICRON Lab's Dielectric Sample Holder DSH 100 (disk electrode type)
•
•
Test cell with cylindrical electrodes
Other geometries
•
Note: More information about the different test cell configurations can be found in chapter 13. "Test cell
of
configurations"
the SPECTANO 100 user manual.
The following table describes the test cell settings.
Table 10-10
Test cell settings
Data
Test cell type selection
Test cell type
Test cell configuration
Guard ring
Coated
1
Test cell settings
Coating material
Electrode material
Electrode/Coating
diameter (d)
Inner diameter of sample
(d
)
1
Description
Name of the tester
Time interval between successive measurements
if more measurements are performed in a test run
Name of the measurement
Date and time the measurement started
Description
Box to select the type of test cell
Select the Guard ring check box for a test cell
with guard ring
Select the Coated check box for a coated test cell
Coating material of the test cell
Material of the test cell's electrode
Diameter of the test cell's electrode or if
Coated is selected: Diameter of the coating
located between the electrodes and the
sample or between the electrodes/guard
ring and the sample (more information in
chapter 13. "Test cell configurations")
Inner diameter of the material sample
SPECTANO Analyzer Suite
53
Advertisement
Table of Contents
