SPECTANO 100 User Manual
9.6
Connect SPECTANO 100 to Dielectric Sample
Holder DSH 100
Connect SPECTANO 100 to OMICRON Lab's DSH 100 Dielectric Sample Holder by using the delivered
triaxial cables as shown in the following figure
Figure 9-7
CAUTION
Minor or moderate injury may occur if the appropriate safety
instructions are not observed.
► Read the safety instructions in this user manual as well as the safety
► Always connect the SPECTANO 100 and DSH 100 earth terminal to
34
Connecting SPECTANO 100 to DSH 100
instructions and corresponding chapters in the DSH 100 user manual
first.
safety ground using a proper ground connection when voltage levels
>30 V
or >60 V
are present in the setup.
AC
DC