Table of Contents
Advertisement
9.4
Connect SPECTANO 100 to a test object
You can connect SPECTANO 100 to a test cell for liquid or solid materials. This
section describes how to connect SPECTANO 100 to the most common test cell
types.
DANGER
Avoid serious injury or death caused by
•
carrying out the testing procedure incorrectly.
•
carrying out the connection incorrectly.
•
not clearly established responsibilities of the personnel involved.
•
either not or incorrectly applied safety rules and instructions.
•
dangerous voltages at touchable parts of the device, test cell or sample.
•
dangerous voltages at the OUTPUT connector of the device.
•
using another power supply than the delivered one (DRA SUPPLY).
•
electric shock from hazardous parts of the device, test cell or sample.
Always observe the five safety rules (see 2 "Safety instructions" on
page 5).
Before performing a test with SPECTANO 100, all on-site procedures and
methods for personal safety and all safety instructions in this User Manual
must be discussed with all personnel involved so that they are familiar with
ed with all personnel
and fully understand all safety rules and instructions.
y understand all safety
Before each test, the responsibility of all personnel involved must clearly
ch test, the re pons
be established, and the testing workflow must be determined.
blished, and the tes
Make sure to exactly comply with the workflow described in this User
ure to exactly
Manual.
Never perform tes
Never perform tests without having secured the danger zone with clearly
visible barriers and having placed all parts with hazardous voltage within
visible barrie
the barriers.
he barriers
Always wear your personal safety equipment.
Always
he device, test cell o
ector of the devic
e delivered one (DR
arts of the device, te
y rules (see 2 "S
with
CTANO 1
al safety and all sa
ins
Installation
est ce
ersonnel involved.
struct
T
31
Advertisement
Table of Contents
