Table of Contents
Advertisement
SPECTANO 100 Quick Start Guide
7.4
Connect SPECTANO 100 to a test object
22
You can connect SPECTANO 100 to a test cell for liquid or solid materials. This
section describes how to connect SPECTANO 100 to the most common test cell
types.
DANGER
Avoid serious injury or death caused by
•
carrying out the testing procedure incorrectly.
•
carrying out the connection incorrectly.
•
not clearly established responsibilities of the personnel involved.
•
either not or incorrectly applied safety rules and instructions.
•
dangerous voltages at touchable parts of the device, test cell or sample.
dangerous voltages at the OUTPUT connector of the device.
•
•
using another power supply than the delivered one (DRA SUPPLY).
•
electric shock from hazardous parts of the device, test cell or sample.
► Always observe the five safety rules (see 2 "Safety instructions" on
page 4).
► Before performing a test with SPECTANO 100, all on-site procedures and
methods for personal safety and all safety instructions in this Quick Start
Guide must be discussed with all personnel involved so that they are
familiar with and fully understand all safety rules and instructions.
► Before each test, the responsibility of all personnel involved must clearly
be established, and the testing workflow must be determined.
► Make sure to exactly comply with the workflow described in this Quick Start
Guide.
► Never perform tests without having secured the danger zone with clearly
visible barriers and having placed all parts with hazardous voltage within
the barriers.
► Always wear your personal safety equipment.
Advertisement
Table of Contents
