Table of Contents
Advertisement
SPECTANO 100 User Manual
Table 6-1
Signal LEDs
LED
State
Green
On
Yellow
Blinking
On or blinking
Blinking
Red
On for approx. 10 s
14
Description
Signals that the power switch is on.
Signals the input activity:
•
Measurement results are available in SPECTANO 100
which are not saved. (This can happen when the
computer is
disconnected from SPECTANO 100 after the measurement
was started.).
•
An error has occurred during measurement (Measurement is
stopped.). After a computer has been connected to
SPECTANO 100, the error information is sent to the
computer and the LED is on.
Signals dangerous voltage on the OUTPUT
connector.
A measurement is running.
The test object is being depolarized after a
measurement has been stopped by SPECTANO Analyzer Suite,
manually or due to an error.
Advertisement
Table of Contents
