Table of Contents
Advertisement
10.2
Create a new test
When creating a new test, SPECTANO Analyzer Suite guides you through the test workflow. This
section describes the test workflow step by step.
To create a new test:
1. Start SPECTANO Analyzer Suite.
2. In the start view, click the New test button
the ribbon. On the left of the test view, the Navigation pane displays steps of the test workflow.
Figure 10-2
3. Under General test settings, enter the settings (see Table 10-9 "General test settings").
4. In the Navigation pane, click Test cell settings.
Under Test cell configuration, select the test cell type, and then enter the test cell settings
(see Table 10-10 "Test cell settings").
5. In the Navigation pane, click Sweep settings, and then enter the settings (see Table 10-11
"Sweep settings").
Note: The sweep settings depend on the measurement mode selected under Measurement mode.
. The test view opens with the File tab selected on
Test view: File tab
SPECTANO Analyzer Suite
37
Advertisement
Table of Contents
