5.7.2
Optional accessories
Description
2 ×Triaxial-to-4 mm plug adapter cable set
2 ×Triaxial-to-BNC connector adapter
cable set
6
Device description
6.1
SPECTANO 100
6.1.1
Connectors and operating controls
Warning
Death or severe injury caused by high voltage or current
► Do not touch the OUTPUT connector when the red LED is on or blinks.
► Always ensure that no dangerous voltages are present at any touchable
part of the device.
► Before handling SPECTANO 100 in any way, connect its equipotential
ground terminal with a solid connection of at least 6 mm
not longer than 20 meters to the ground terminal in the laboratory.
OUTPUT connector
Measurement voltage: 200 V
Max. continuous output current: 50 mA
Max. output frequency: 5 kHz
Red LED
See Table 6-1 "Signal LEDs"
on page 17
Figure 6-1 SPECTANO 100 front view
Part No.
OL000451
OL000452
peak
STOP button
peak
Stops measurements
Green LED
See Table 6-1 "Signal LEDs"
on page 17
Introduction
Picture
2
cross-section and
INPUT connector
Yellow LED
See Table 6-1 "Signal LEDs"
on page 17
13