Omicron Lab SPECTANO 100 User Manual page 63

SPECTANO 100 User Manual
Table 10-17
Command
1. For Cylindrical electrode seletion under Test cell settings only one reference is available.
62
Commands on the Reference(s) tab
Description
Start Opens a submenu in which you can select to
perform reference measurement (1) or (2)
Stop Stops the reference measurement.
Clear selected
Opens a drop-down list from which you can select
results the reference measurement whose results you
want to delete.
Clear all results
Deletes results of all reference measurements.
The material measurement results are preserved.
Load from
Opens a drop-down list from which you can select
device the reference measurement into which you want
to load the results from the device.
Note: The settings are not loaded. For more
information, see 10.10 "Load from the device".
.
1