10
SPECTANO Analyzer Suite
In this chapter you will learn how to test dielectric materials with SPECTANO Analyzer Suite and manage
the test data. The chapter is structured as follows:
•
Section 10.1 "Start view" gives you an overview on the
•
Section 10.2 "Create a new test" describes the workflow for creating a new test.
Section 10.4 "Perform reference measurements" explains how to correct the measurements to
•
improve the accuracy of the measurement results.
Section 10.5 "Perform analysis" is about performing an analysis of the measurement results.
•
In chapter 10.6 "View measurement results" you will find a detailed description of the result
•
view workspace.
Finally, in chapter 10.7 "Settings", all SPECTANO Analyzer Suite
•
nutshell.
10.1
Start view
After starting SPECTANO Analyzer Suite, the start view opens. In the start view, you can select different
user tasks designed to support you during diagnostic testing of dielectric materials and management of
test data.
Figure 10-1
o
SPECTANO Analyzer Suite start view.
SPECTANO Analyzer Suite start view
SPECTANO Analyzer Suite
settings are described in a
35