ABB DSQC1016 Manual page 47

Product manual - Connected Services
3HAC060439-001 Revision: E
3 Installation of Service Box in Robot Controllers
3.5 Installing or replacing DSQC 1016/1023 in IRC5C 2nd Gen from 19B
Note
If you choose to install the ethernet switch, remove the top four kick-off
holes.
7 Add the SIM card to the new Connected Services box.
Note
This step of adding SIM card is required only if you are installing a 3G
service box (DSQC 1016).
8 Assemble the Connected Services box in to the new bracket.
xx1800003183
9 If you are using Ethernet switch module then you need four pieces of M4
screws to assemble it.
xx1800003184
10 Assemble the adapter cable.
© Copyright 2019 ABB. All rights reserved.
Continued
Continues on next page
47