ABB DSQC1016 Manual page 37

Product manual - Connected Services
3HAC060439-001 Revision: E
3 Installation of Service Box in Robot Controllers
3.4 Installing or replacing DSQC 1016/1023 in IRC5C 2nd Gen before 19B
14 Add the SIM card to the new Connected Services Box.
Note
This step of adding SIM card is required only if you are installing a 3G
service box (DSQC 1016).
15 Assemble the Connected Services Box in to the new bracket.
xx1800003183
16 If you are using Ethernet switch module then you need four pieces of M4
screws to assemble it.
xx1800003184
17 Assemble the adapter cable.
© Copyright 2019 ABB. All rights reserved.
Continued
Continues on next page
37