ABB DSQC1016 Manual page 60

4 Service Box configuration
4.1 General Configuration
Continued
This table describes the features of the Cosy 131 box.
Code
S
A
R
P
L
This table describes the limitations of the Cosy 131 box.
Code
1I
R
C
S
Continues on next page
60
Name Setup by
Connected Disabling Embed-
Services ded Connected
Service Gateway
Remote Ac- Enabling Remote
cess Access through
the Service Box
Remote Enabling Remote
Configura- Configuration
tion from Server
Passthrough Enabling Embed-
Gateway ded Connected
Service Gateway
LAN Config- Enabling Embed-
uration ded Connected
Service Gateway
Name Setup by
Local ABB Enabling ABB
Account Local Account
Remote ABB Enabling ABB
account Remote Account
Controller Enable Commu-
Communica- nication to the
tion Robot Controller
Server Com- Enable Commu-
munication nication to the
Server
Note
To maintain high cyber security, it is recommended to change the configuration
password and keep the local ABB account disabled. If the password is lost, the
Service Box must be fully reconfigured.
© Copyright 2019 ABB. All rights reserved.
Default Description
Enabled Service data collection and con-
nectivity is managed by Service
Box.
No need to use Embedded Connec-
ted Service.
Enabled Provide the Remote Access feature
to the devices connected to the
Service Box.
Enabled The Remote Access credentials can
be defined from the server (MyRo-
bot).
Disabled Service data collection is managed
by Embedded Connected Services.
Connectivity is done through the
box (used as gateway) to internet.
Disabled Configuration of LAN Service Box
is possible for connection outside
the controller (Controller WAN used
instead of service port).
Default Description
Disabled The ABB Local Account used for
troubleshooting are available.
This can be disabled by the custom-
er if needed.
Enabled The ABB Remote account used for
receiving commands from server is
available.
Disabling the command will block
the Connected Services standard
behavior.
Enabled / The communication with the Robot
Hidden controller is available.
Disabling the command will block
the Connected Services standard
behavior.
Enabled / The communication with ABB Serv-
Hidden er is available.
Disabling the command will block
the Connected Services standard
behavior.
Product manual - Connected Services
3HAC060439-001 Revision: E