ABB DSQC1016 Manual page 131

FTP view
xx1400002661
Connecting to other equipments
Any ethernet based equipment which have been configured with an IP 192.168.125.*
and physically connected to the LAN switch of the Service Box (directly or through
additional switch or router) can be accessed remotely. This could be the Vision
system, IPS board, PLC, welding system, PCs, or even the serial equipments if
there is an ethernet to serial converter added.
The connection is made with the tools available for the local equipments given by
the equipment provider (either direct HTTP or devpt tools). For example, ABB with
AC 500 using Codesys or FTP/HTTP.
Controlling the access to the equipments using eCatcher
By default all the devices in the range 192.168.125.* can be remotely accessed. It
is possible to limit the access to the devices by an Administrator using eCatcher.
For more details, see
page
Product manual - Connected Services
3HAC060439-001 Revision: E
Controlling the access to the equipments using eCatcher on
137.
© Copyright 2019 ABB. All rights reserved.
7 Remote Access
7.5 Preparation for Remote Access
Continued
131