ABB DSQC1016 Manual page 150

8 Service Box used as Gateway
8.3 Configuring a Service Box as Gateway
Continued
Continues on next page
150
The error message "Connected servicebox exists"appears if the Service
Box is already connected.
Note
Disconnect the Service Box from the controller in the Connected Services
portal, when the above message appears.
3 Go to the Customer Agreement to which the Gateway SB has been created
and added.
4 From Agreement, under Products tab click + icon to add new products
en1600002027
5 Select the newly added Gateway SB and click Add Products button.
6 Wait for some time and login to RS portal.
7 Go to Service Boxes page and click Gateway Boxes tab. The newly added
gateway box details will be listed here.
en1600002028
8 To create the Service Box as a Gateway Box, you need to enable the Gateway
features. To enable this, refer to the section
and select the Enable Embedded Connected Services Gateway check box
under Features.
© Copyright 2019 ABB. All rights reserved.
Configuring the user on page 59
Product manual - Connected Services
3HAC060439-001 Revision: E