ABB DSQC1016 Manual page 120

7 Remote Access
7.4 Customer site configuration
Continued
Testing the connection
For testing the connection, a quick connection can be made by using 0/24 V to
power the box to enable the digital input. The digital input can then be switched
ON/OFF by plugging or unplugging the I/O connector on the box.
en1600001567
Creating the Talk2M account
The Service Box connects for Remote Access using a Talk2M account. You need
to create a Talk2M administrator account and register the information in the service
box. For more details, see
Configuring the Service Box
Introduction
The Remote Access features should be enabled in the Service Box and the Service
Box should be configured to manage Remote Access.
Verifying the remote access capabilities
The Remote Access option should be enabled in the firmware of the service box.
For this:
Continues on next page
120
• The Service Box type should include the Remote Access feature enabled.
To verify this, connect to the Service Box in Config mode, click User Setup,
© Copyright 2019 ABB. All rights reserved.
Creating the Talk2M account on page
Product manual - Connected Services
135.
3HAC060439-001 Revision: E