ABB DSQC1016 Manual page 73

Results
Menu
WAN connection
UDP connection
HTTPS direct connection
HTTPS proxy connection
Read VPN config
Test VPN connection
VPN Connection Status
WAN / VPN
Diagnosis
Displays information, warning, or error reports about authentication process.
Restart authentication
This button allows to restart the authentication process.
Product manual - Connected Services
3HAC060439-001 Revision: E
Note
The complete authentication of process is done to validate and secure the channel
and receive ABB certificates -
• after modifying the configuration
• after forcing an authentication through the Restart authentication button
• if there is a problem to setup the connection correctly or if the connection
is lost
Note
The LED color of the modem (ST LED) indicates the status of the network
connection to the server by wireless connection.
• Green indicates the connection is successful.
• Off indicates the connection is not successful.
Note
T2M LED is green if Talk2M is used for connectivity.
@ LED is green when the connection to ABB is successful.
© Copyright 2019 ABB. All rights reserved.
4 Service Box configuration
4.4 Verifying Network Connection
Description
Indicates the box has a WAN address
Indicates if the connection to the internet is done through UDP.
If UDP is not available, then the connection is done through
TCP and the message Operation skipped is displayed.
Indicates if the connection to the internet is through HTTPS
without proxy. If not, then the message Operation skipped is
displayed.
Indicates if the connection to the internet is through HTTPS
with proxy. If not, then the message Operation skipped is dis-
played.
Indicates if the VPN configuration parameters are secured
correctly
Indicates if the VPN connection is validated correctly
Indicates if the VPN connection is implemented correctly
Indicates if the WAN and VPN IP address are defined correctly
Continued
73