ABB DSQC1016 Manual page 27

9
10
11
12
13
14
15
16
Product manual - Connected Services
3HAC060439-001 Revision: E
3 Installation of Service Box in Robot Controllers
Action
Mount the Service Box on the inside of the
door using the supplied bracket.
Connect the power supply cable to connector
A61.X1 on the Service Box.
Connect the Ethernet cable from the service
port on the main computer to Ethernet port
A61.P1 on the Service Box.
Connect the Ethernet cable from the service
port on the front panel to Ethernet port A61.P2
on the Service Box.
Connect the internal antenna cable to the
Service Box, connector A61.X2.
Insert dust protectors (supplied in the kit) in
all empty Ethernet ports of the Service Box.
Connect the external antenna cable to the ad-
apter cover plate on the outside of the control-
ler.
Place the antenna on top of the controller.
© Copyright 2019 ABB. All rights reserved.
3.2.1 Connected Services kit
Note/Illustration
en1600001569
The same cable as in step 5.
en1600001570
The same cable as in step 6.
en1600001570
For best reception, place the antenna
high and upright.
For best magnetic adhesion, place the
antenna on a clean surface.
Continued
27