ABB DSQC1016 Manual page 17

Configuring Service Box DSQC1016 3G and DSQC1023 WiFi
The service boxes can be used with a wireless 3G Direct connection by default or
with a connection through wired or wireless Internet.
Retrofit Kits
The following are the different retrofit kits available on the
Service support
If a specific pre-installation is required for new robots delivery, then contact the
Connected Services product manager for definition and price.
Table DSQ/Option per version
This table describes which DSQ box to use according to the RobotWare version
and the type of controller. Here, DSQC1016 is Cosy 131 3G and DSQC1023 is Cosy
131 WiFi.
en1600001555
Product manual - Connected Services
3HAC060439-001 Revision: E
2 Introduction to the Connected Services Kit
Note
• If you intend to use the service box with Direct 3G connection then you do
not need to configure the box.
• If you intend to use the service box with wired or wireless Internet connection
or for some advanced wireless configuration, go to Configuration web page,
see Set up Network Service Box for Connected Services on page
is only for advanced configuration.
page.
• Two Retrofit Kits
- Retrofit Kit 3G +Internet
- Retrofit Kit WiFi+Internet
• Two Factory Option
- Factory Option, 890-4 (3G + Internet)
- Factory Option, 890-5 (WiFi+Internet)
- Access in Parts Online to see the details of Kits
- ABB Parts OnLine
© Copyright 2019 ABB. All rights reserved.
2.2 Service Box DSQC1016 and DSQC1023
Connected Services
(3HAC060577-001)
(3HAC060577-002)
Continued
67. This
17