ABB DSQC1016 Manual page 69

2
3
4
5
6
7
8
9
Product manual - Connected Services
3HAC060439-001 Revision: E
4.3.1 Set up Network Service Box for Connected Services
Action
Type config as both user login and password.
Click Configuration Menu and select WAN Setup.
Select Force Date Change from Date Setup.
The Date and Time fields are displayed.
• Enter Date in DD/MM/YYYY format
• Enter Time in HH:MM:SS format
Select an option from the WAN Setup list.
• Select WAN external (X14) to configure the
WAN IP address, DNS IP address and Web
proxy through an Internet Gateway (Network
Service Box).
Select an option from the Address Setup list.
• Select Static WAN IP to configure the WAN
IP and DNS IP manually.
• Select DHCP WAN IP to configure the WAN
IP and DNS IP automatically.
Select Via DHCP from DNS Setup to configure
DHCP Config.
Select User Proxy from Proxy Setup to configure
the proxy server. (If a proxy is needed to connect
to the internet.)
Click Change Configuration.
© Copyright 2019 ABB. All rights reserved.
4 Service Box configuration
Note
In case, you have changed the
password to anything other than
config, type the new password.
The WAN Setup page is dis-
played.
This is optional and is needed
only if the date is completely inval-
id i.e. if the current date of the box
is different from the present date
and if the connection is not pos-
sible.
To view the current date of the
box, navigate to Information
menu, and then select Home
page.
Once you select Via DHCP, the
WAN IP and DNS IP fields are
disabled.
Proxy can be configured:
• with proxy authentication
• without proxy authentica-
tion
This reboots the Network Service
Box and takes few minutes for re-
connecting.
The Network connection status
can be tracked through the ABB
VPN Status page. For more inform-
ation, see Verifying Network Con-
nection on page 72.
Continues on next page
Continued
69