Removing The Main Silencer; Installing The Main Silencer; Changing The Glass Fiber Yarn Filling In The Main Silencer - GAS GAS MC 125 2022 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.28
11.29
11.30
58

Removing the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.

Installing the main silencer

Changing the glass fiber yarn filling in the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the rock wool escape into the air, and the main silencer "burns out".
Not only is the noise level higher, the performance characteristic changes.
–
Remove screws
–
Pull off the main silencer from the manifold at exhaust sleeve
S04550-10
–
Position the main silencer in exhaust sleeve
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
S04551-10
Preparatory work
–
Remove the main silencer. (
1
with the washers.
1
2
with the washers.
M6 10 Nm (7.4 lbf ft)
p. 58)
2
.
.