14.9
Changing the headlight bulb
Note
Impairments to reflectors and lamps Grease on the reflector reduces the emitted light.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
Grease residue on the bulb reduces heat dissipation and increases the heat of the bulb, thus reducing its service life.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
–
Position the headlight mask.
Info
Pay attention to routing of the brake line.
–
Mount and tighten screws
Guideline
Screw, headlight mask
V02740-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Unplug connector
–
Take off protection cap
V02741-10
–
Detach spring bar
–
Remove headlight bulb
–
Insert a new headlight bulb into the headlight housing.
Headlight (H4/socket P43t) (
–
Fix the headlight bulb in the headlight using the spring bar.
–
Mount the protection cap. Plug in the connector.
V02742-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
ELECTRICAL SYSTEM 14
3
.
M5
2 Nm (1.5 lbf ft)
p. 95)
1
.
2
of the headlight bulb.
3
.
4
.
p. 121)
p. 92)
p. 95)
p. 92)
93