15 ELECTRICAL SYSTEM
15.5
100
Changing the fuses of individual electrical power consumers
Info
The fuse box containing the fuses of individual electrical power consumers is located under the seat.
–
Take off protection caps
–
Remove faulty main fuse
Info
A faulty fuse has a burned-out fuse wire
A spare fuse
–
Insert a new main fuse.
Fuse (58011109120) (
–
Check that the electrical system is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
–
Mount the protection caps.
–
Mount the starter relay onto the holder and route the cable.
F03245-10
Finishing work
–
Mount the seat. (
Preparatory work
–
Remove the seat. (
Main work
–
Open fuse box cover
–
Remove the faulty fuse.
Guideline
Fuse 1 – 10 A – EFI control unit, combination instrument, com-
bination switch (optional), electronic fuel injection, diagnostics
connector, fuse 4
Fuse 2 ‑ 10 A ‑ high beam, low beam, position light, tail light,
license plate lamp
F03246-10
Fuse 3 - 10 A - radiator fan (optional), horn, brake light, turn sig-
nal
Fuse 4 - 5 A - fuel pump
Fuses res - 10 A - spare fuse
Info
A faulty fuse has a burned-out fuse wire
2
.
3
.
A
4
is located in the starter relay.
p. 132)
p. 60)
p. 60)
1
.
A
.
.