Part 1 Product Specifications And Handling - Mitsubishi MELSEC-Q Series User Manual

PART 1 PRODUCT
PART 1 consists for the following purposes (1) to (4).
(1) To understand the outline of positioning control, and the QD72P3C3 specifications and functions
(2) To perform actual work such as installation and wiring
(3) To set parameters and data required for positioning control
(4) To create a sequence program required for positioning control
For details of each control, refer to "PART 2".
CHAPTER1 PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 to 1 - 13
CHAPTER2 SYSTEM CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1 to 2 - 9
CHAPTER3 SPECIFICATIONS AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . 3 - 1 to 3 - 19
CHAPTER4 DATA USED FOR POSITIONING CONTROL . . . . . . . . . . . . . . . 4 - 1 to 4 - 31
CHAPTER5 PROCEDURES AND SETTINGS BEFORE OPERATION . . . . . . 5 - 1 to 5 - 21
CHAPTER6 UTILITY PACKAGE (GX Configurator-PT) . . . . . . . . . . . . . . . . . . 6 - 1 to 6 - 22
CHAPTER7 SEQUENCE PROGRAM USED FOR POSITIONING CONTROL 7 - 1 to 7 - 31
SPECIFICATIONS
AND HANDLING