Mitsubishi MELSEC-Q Series User Manual page 123

6
UTILITY PACKAGE (GX Configurator-PT)
POINT
Initial settings are stored in an intelligent function module parameter file.
After being written to the CPU module, the initial setting is made effective by either
(1) or (2).
(1) Cycle the RUN/STOP switch of the CPU module: STOP
RUN.
(2) With the RUN/STOP switch set to RUN, turn off and then on the power or
reset the CPU module.
If the initialization settings have been written by a sequence program, the
initialization settings will be executed during the STOP
module. Arrange so that the initial settings written by the sequence program are
re-executed during the STOP
RUN of the CPU
RUN of the CPU module.
6.4 Initial Setting
1
2
RUN STOP
3
4
5
6
7
8
6
- 14