Chapter13 Common Function; Outline Of Common Function - Mitsubishi MELSEC-Q Series User Manual

13
COMMON FUNCTION

CHAPTER13 COMMON FUNCTION

This chapter describes details of the common function of the QD72P3C3.
13.1

Outline of Common Function

"Common function" is the generic term for functions operable as necessary, regardless of
the control method.
These common functions can be executed using GX Developer.
For details of GX Developer, refer to the GX Developer Operating Manual.
The following table shows the details of "common function".
Common function
External I/O signal
logic switching
External I/O signal
monitor
13
- 1 13.1 Outline of Common Function
Description
This function changes the external I/O
signal logic to match the device
connected to the QD72P3C3.
This function monitors the external I/O
signal status.
Operating method
Set the switches on the [I/O assignment] tab in the
[Qn[H] Parameter] screen of GX Developer.
(Intelligent function module switch)
Monitors the external I/O signal information on the
[Module's Detailed Information] screen, which can
be displayed from the [System Monitor] screen of
GX Developer.