Mitsubishi MELSEC-Q Series User Manual page 69

4
DATA USED FOR POSITIONING CONTROL
Current feed value, count value simultaneous change function selection
Pr.9
[Setting contents]
Make setting to change "
same value at current value change or presetting.
Md.1
0: Values not
changed The current feed value, count value simultaneous change function is not used.
simultaneously
1: Count value
Stores the value set to "
changed together at
value change execution to "
current value change
2: Current feed value
Stores the value set to "
changed together at
feed value" and "
preset
Stores the values set to "
3: Values changed
value change execution to "
both at current value
Stores the value set to "
change and at preset
feed value" and "
Current feed value" and "
Positioning address/movement amount"at current
Da.5
Current feed value" and "
Md.1
Preset value setting" at preset to "
Cd.5
Count value".
Md.3
Positioning address/movement amount" at current
Da.5
Current feed value" and "Md.3 Count value".
Md.1
Preset value setting" at preset to "
Cd.6
Count value".
Md.3
4.2 Parameter List
Count value" to the
Md.3
Count value".
Md.3
Current
Md.1
Current
Md.1
4
- 12
1
2
3
4
5
6
7
8