How To Read This Manual; Compliance With The Emc And Low Voltage Directives - Mitsubishi MELSEC-Q Series User Manual

HOW TO READ THIS MANUAL

Compliance with the EMC and Low Voltage Directives

A
- 10
(1) The symbols used in this manual are shown below.
Indicates parameter item.
Pr.*
Indicates JOG data item.
JOG.*
Indicates positioning data item.
Da.*
Indicates monitor data item.
Md.*
Indicates control data item.
Cd.*
(Serial No. is displayed at the *.)
(2) Numeric values used in this manual
The buffer memory addresses, error codes and warning codes are represented in
decimal.
The X/Y devices are represented in hexadecimal.
The setting data and monitor data are represented in either decimal or hexadecimal.
The data whose name is ended by "H" are represented in hexadecimal.
(Example) 10......Decimal, 10
(1) For programmable controller system
To configure a system meeting the requirements of the EMC and Low Voltage
Directives when incorporating the Mitsubishi programmable controller (EMC and Low
Voltage Directives compliant) into other machinery or equipment, refer to Chapter 9
"EMC AND LOW VOLTAGE DIRECTIVES" of the QCPU User's Manual (Hardware
Design, Maintenance and Inspection).
The CE mark, indicating compliance with the EMC and Low Voltage Directives, is
printed on the rating plate of the programmable controller.
(2) For the product
To make this product conform to the EMC and Low Voltage Directives, please refer to
"Section 5.4.1 Wiring precautions".
......Hexadecimal
H