Qr Code - Honeywell Granit XP 199 i Series User Manual

QR Code

QR Code On/Off
This selection applies to both QR Code and Micro QR Code.
QR Code Message Length
Scan the barcodes below to change the message length. Refer to
Description
lengths = 1-7089. Minimum Default = 1, Maximum Default = 7089.
Minimum Message Length
QR Code Append
This function allows the scanner to append the data from several QR Code bar-
codes together before transmitting them to the host computer. When the scanner
encounters an QR Code barcode with the append trigger character(s), it buffers the
number of QR Code barcodes determined by information encoded in those bar-
codes. Once the proper number of codes is reached, the data is output in the order
specified in the barcodes. There are 3 ways to scan appended QR Code:
One Scan: Pull the trigger one time and all appended QR Codes in the same image
are decoded.
188
< Default All QR Code Settings >
* On
(page 142) for additional information. Minimum and Maximum
Off
Message Length
Maximum Message Length
Granit XP User Guide