Qr Code - Honeywell Solaris 7980g User Manual

QR Code

QR Code On/Off
This selection applies to both QR Code and Micro QR Code.
QR Code Message Length
Scan the bar codes below to change the message length. Refer to
Description
= 1-7089. Minimum Default = 1, Maximum Default = 7089.
Minimum Message Length
QR Code Append
This function allows the scanner to append the data from several QR Code bar
codes together before transmitting them to the host computer. When the scanner
encounters an QR Code bar code with the append trigger character(s), it buffers
the number of QR Code bar codes determined by information encoded in those bar
codes. Once the proper number of codes is reached, the data is output in the order
specified in the bar codes. There are 3 ways to scan appended QR Code:
One Scan: Pull the trigger one time and all appended QR Codes in the same image
are decoded
138
< Default All QR Code Settings >
* On
(page 92) for additional information. Minimum and Maximum lengths
Off
Message Length
Maximum Message Length
Solaris 7980g User Guide