Panel Mounting - Xylem WTW DIQ/S 281 Operating Manual

Installation
Mounting the DIQ/
S 28X on a top hat
rail
Switch panel
mounting sets
24
figure 3-9 Mounting the DIQ/S 28X on a top hat rail
1 Screw the clamping assembly (pos. 1 in figure 3-9) on the back of the
universal transmitter with the two plastic tapping screws (pos. 2).
2 Attach the universal transmitter to the top hat rail from above using the
clamping assembly and press against the rail until the clamping
assembly clicks into place. The universal transmitter can be moved
sideways afterwards.
3 To unhook the universal transmitter, press it downward and pull it
forward at the bottom.
3.6.5

Panel mounting

The universal transmitter DIQ/S 28X can be mounted to the switch panel with
the PMS/IQ mounting set.
DIQ/S 28X-CR2
Switch panel Switch panel
mounting set aperture
PMS/IQ 138 x 138 mm
DIQ/S 281
1
2
Max. thickness
of the switch
panel
10 mm
ba77244d01 08/2020