Setting The Relay Outputs - Xylem WTW DIQ/S 281 Operating Manual

Outputs
94
6.6

Setting the relay outputs

1 Call up the measured value display with
2 Open the Einstellungen/Settings menu with
<
3 Using 
links, and confirm with
appears.
<

4 Using
<

5 Using
Feature. Confirm with
The Settings of outputs and links display opens.
<
6 Using 
<OK>
with .
figure 6-15 Settings of outputs and links
<

7 Using
<OK>
.
>
, highlight the menu item, Settings of outputs and
<OK>
. The Settings of outputs and links display
>
, highlight the Feature column. Confirm with
>
, highlight a line for a relay output (Rx) in the column
<OK>
.
>
, highlight the menu item, Relay function, and confirm
>
, select one of the functions listed below. Confirm with
<M>
.
<S>
.
ba77244d01
DIQ/S 281
<OK>
.
08/2020