Access To The Diq/S 28X With Active Access Control; Settings For Sensors - Xylem WTW DIQ/S 281 Operating Manual

Settings/setup
Sensor settings
72
<
4 Press 
<OK>
.
<
5 Using 
memory and confirm with
The password for the selected authorization level is saved to the USB
memory device.

5.3.4 Access to the DIQ/S 28X with active access control

 Administrator access through entering the password:
– After 10 minutes without key-pressing, the highest protection
level is automatically activated.
– Select the menu Display/Options / Viewing only.
The highest level of protection is activated.
 Administrator access through connecting the electronic key: The
protection is restored by disconnecting the electronic key
5.4

Settings for sensors

Sensor settings include the measured parameter, measuring range and, if
necessary, compensations.
The following diagram shows the operating steps to call up the sensor setting
>
to select an authorization level and confirm with
>
, select the menu item, Save access code on USB
<OK>
.
DIQ/S 281
ba77244d01 08/2020