Location Altitude / Average Air Pressure - Xylem WTW DIQ/S 281 Operating Manual

Settings/setup
80
figure 5-11 Date/Time
<

5 Press
The next field is highlighted, e.g. Month.
6 Complete the entries on the display Date/Time.
The clock in the DIQ/S 28X bridges periods of power failure of up to
several hours. After a longer power failure, the clock starts precisely
at the time of the failure. A message and an entry in the log book
provide information on the power failure and the necessity for reset-
ting the clock.

5.7.2 Location altitude / average air pressure

Air pressure values can be set within a range of 500 to 1100 mbar.
1 Open the Einstellungen/Settings menu with
<
2 Using 
System settings -> Location altitude/Air pressure.
The Location altitude/Air pressure display opens.
> <OK>
and to select and confirm a number.
> <OK>
and , select and confirm the menu item,
DIQ/S 281
<S>
.
ba77244d01 08/2020