Xylem WTW DIQ/S 281 Operating Manual page 16

Installation
16
figure 3-1 Connecting the cable (example DIQ/S 28XCR2)
2 Screw the cable gland (no. 029 212, pos. 1 in figure 3-1) with the sealing
(pos. 2) into the housing at the mounting position for the SENSORNET
connection (see label on the bottom of the housing)
3 Loosen the cap nut (pos. 3 in figure 3-1).
4 Feed the sensor cable through the cable gland into the enclosure.
SENSORNET
2
1
3
SNCIQ
SNCIQ/UG
X3 X2 X1
SENSORNET 1
SACIQ
ba77244d01
DIQ/S 281
08/2020