Deleting A Link With An Output - Xylem WTW DIQ/S 281 Operating Manual

DIQ/S 281
ba77244d01
6.5

Deleting a link with an output

If a link between a current or relay output and a sensor is no longer required, you
can erase the link.
1 Open the Einstellungen/Settings menu with
<

2 Using
System settings -> Settings of outputs and links.
The Settings of outputs and links display opens.
<
3 Press 
4 Select a linked output with
figure 6-14 Settings of outputs and links: Erase link
<

5 Using
A safety query appears.
<

6 Using
The link is deleted.
08/2020
> <OK>
and , select and confirm the menu item,
>
to highlight the & column and confirm with
<

>
, select Erase link and confirm with
>
, select Erase link and confirm with
<S>
.
> <OK>
and confirm with
<OK>
<OK>
Outputs
<OK>
.
.
.
.
93