Table of Contents
Advertisement
DIQ/S 281
Initial start phase
Second start
phase
ba77244d01
The Universal Transmitter is initialized during the first start phase. All compo-
nents are automatically registered with the Universal Transmitter DIQ/S 28X.
The system then performs a self test. This process can take several seconds.
During this period, the following display appears:
figure 3-19Display during the initialization process
As soon as the Universal Transmitter is successfully initialized, the measured
value display appears. In the case of IQ sensors that are not yet providing mea-
sured values, "Init" appears temporarily
figure 3-20Display after initialization of the terminal
If the system start failed, see chapter 8 W
08/2020
Installation
....
HAT TO DO IF
39
Advertisement
Table of Contents
