Operation
64
4.10 Info on software versions
The system informs you of the current versions of the software of the individual
components.
1
Call up the measured value display with
2
Open the Einstellungen/Settings menu with
<
3
Using
<OK>
. The Service dialog window opens.
<
4
Using
<OK>
confirm with
The List of all components dialog box opens.
figure 4-12 List of all components
5
Exit the List of all components dialog box with
If the software version of a component is not up-to-date, you can
carry out a software update via the USB interface (see section 4.11).
4.11 Software-Update for the DIQ/S 281 and sensors
With a Software-Update, you maintain the latest state of the instrument software
for the Universal Transmitter DIQ/S 281 and all active components.
The update packet with the current instrument software for active components
and detailed instructions on how to proceed are available on the Internet at
www.WTW.com.
>
, highlight the menu item, Service, and confirm with
>
, highlight the menu item, List of all components, and
.
<M>
.
<S>
.
<M>
<ESC>
or
ba77244d01
DIQ/S 281
.
08/2020