Behavior In Non-Operative Condition - Xylem WTW DIQ/S 281 Operating Manual

DIQ/S 281
Settings in the
non-active
condition
ba77244d01

6.9.2 Behavior in non-operative condition

An output is non-operative when no function is activated for the output.
An output becomes non-operative in case of
 Power failure
(As soon as the supply voltage is sufficient again, the non-operative condition
of the outputs ends. The outputs function as specified by the user again.)
 Erasing a link to a sensor
 Changing the Measuring mode sensor setting for a linked sensor
 Changing the Measuring range sensor setting for a linked sensor
Before editing sensor settings a note appears on the display to
inform you that links will be erased when you change the Measuring
mode or Measuring range sensor setting.
Current output
Current: 0 A
08/2020
Relay output
Relay: Open
Outputs
113