DIQ/S 281
Switching off the
instrument block
Saving a password
to an electronic
key
ba77244d01
<
4
Using
The settings are adopted.
The Access control dialog window is still open.
The current passwords are visible.
<OK>
1
Press
The password query is displayed.
2
Enter and confirm the administrator password with
<OK>
.
3
Open the Einstellungen/Settings menu with
Deactivate the access control.
Take over the setting.
5.3.3 Electronic key
The administrator can simplify access to the DIQ/S 28X by saving the password
to USB memory. The USB memory thereby becomes an electronic key.
When the electronic key is connected to the DIQ/S 28X, the user right stored
there with the relevant password is automatically read out. The user of the elec-
tronic key is logged on to the system with his user right without any further pass-
word prompt.
When the electronic key is disconnected, the DIQ/S 28X automatically switches
to the lowest user right.
Passwords for different IQ S
tronic key.
For each IQ S
ENSOR
tronic key.
1
Connect the USB memory to the USB-A interface.
Administrator rights are required when the access control is active.
2
Open the Einstellungen/Settings menu with
<
3
Using
Access control.
The Access control dialog window opens.
08/2020
>
, select OK and confirm with
to open the Display/Options / Change user rights menu.
N
systems can be saved to every elec-
ENSOR
ET
N
system only one password can be saved to each elec-
ET
>
<OK>
and
, select and confirm the menu item,
Settings/setup
<OK>
.
<
>
and
<S>
.
<S>
.
71