Dissolved Oxygen Transmitter
2. Safety, Repair and Product Identification
Safety Instructions
• Read this manual carefully.
• Pay attention to the environment on the installation site.
• Wear necessary protective equipment and follow all current safety regula-
tions.
• Oxix
can invoke a start signal for dangerous machinery. Always ensure
®
that connected machinery and other equipment are effectively put out
of service (that is to remove the main fuses and lock main and security
switches in off-position) before commencing configuration, fault finding,
servicing, maintenance work, etc.
• WARNING: There is a risk of lethal, electrical shock from the "Mains sup-
ply" terminals "N" and "L". Be careful not to touch these terminals when
the Oxix
front cover is removed.
®
• WARNING: Incorrect installation or use can lead to body injury and/or
material damage!
Physical Mounting
The Oxix
converter/display unit must not be mounted in explosion hazard-
®
ous areas!
Oxix
may only be installed and commissioned by authorized MJK personnel,
®
and all national and local regulations must be complied with.
Repair
Repair must only be made by authorized MJK personnel or by a service rep-
resentative approved by MJK.
Product Identification
A delivery will usually consist of an Oxix
or without a display unit.
Check that the item(s) delivered corresponds to the ordered item(s). The part
number is printed on an identification label stuck on the converter shipping
box and on a label on the converter itself.
GB Oxix Manual 1209
sensor and an Oxix
®
13
converter with
®
FW: 841013-009, 846001-002, 841513-009