Table of Contents
Advertisement
Installation
Connecting the
power line
30
cut ground wire here
figure 3-12 Prepared power cable.
The ground wire must not project into the enclosure. Otherwise, malfunctions
could occur.
5
On the left-hand side of the DIQ/S 28X, remove the two countersunk
screws and open the enclosure.
4
2
1
N
3
L
figure 3-13 Inserting the supply line.
6
Screw a cable gland (pos. 1 in figure 3-13) with sealing ring (pos. 2) into
the enclosure below the power supply connection.
7
Loosen the coupling ring (pos. 3).
8
Feed the power line through the cable gland into the enclosure. When
doing so bend the flexible divider (pos. 4) to the right.
approx. 45 mm
L
N
DIQ/S 281
ba77244d01
08/2020
Advertisement
Table of Contents
