Table of Contents
Advertisement
DIQ/S 281
Connecting the
24 V AC/DC line
ba77244d01
figure 3-15 Prepared 24 V AC/DC line.
4
On the left-hand side of the DIQ/S 28X, remove the two countersunk
screws and open the enclosure.
2
1
3
figure 3-16 Inserting the 24V AC/DC line
5
Screw a cable gland (pos. 1 in figure 3-16) with sealing ring (pos. 2) into
the enclosure below the 24 V AC/DC connection.
6
Loosen the coupling ring (pos. 3).
7
Feed the 24 V AC/DC line through the cable gland into the enclosure.
When doing so bend the flexible divider (pos. 4) to the right.
08/2020
ca. 45 mm
wire 1
wire 2
4
Installation
33
Advertisement
Table of Contents
